Posts tagged durango organic landscaping

DURANGO LANDSCAPER BUILDS A FLAGSTONE WALK OR PATIO

landscaping a patio timber walls compaction sand plate compactor flagstone patio

Compacted sand ready for flagstone to be laid o

BUILDING A FLAGSTONE PATIO OR WALKWAY

The purpose of this post is to outline how Gardenhart Landscape & Design cuts and fits flagstone, for use either in a patio situation or pathway application.  There are probably other methods in use by different contractors, but this is the technique I learned thirty years ago by a Master Stonemason.  Of course, I have my own take on what looks proper and it will vary with the individual who places and cuts the stone.

We will start with the assumption that you have determined the location of the patio and proper drainage issues resolved, you have also decided what material will contain the sand base ; natural stone, treated timbers or some manufactured flexible edge product.  You have also properly compacted a sand base to set the stone upon and allow you to level the individual pieces of stone.

Tools Needed to Build a Flagstone Patio or Walkway

A quick review of your tools might be helpful here, the most important one being an angle grinder with a diamond blade.  Lots of you might have a grinder and you only

Durango Colorado landscapers cut flagstone tools used

Hand tools used by Gardenhart Landscape & Design to install and cut flagstone

need to get to the hardware store for a diamond blade. Before you go to the store, make sure you also have the following tools on hand: safety glasses, hearing protectors, dust mask,gloves, stone mason’s chisel, hammer, carpenters pencil with hard lead, tape measure and a level.

The first thing I do is to unload about half of my stone from the pallet and lay it out around the work site so that I can see each piece, but be sure not to put them in the patio area just yet.  This helps me find pieces that will naturally fit in specific locations.  Then, starting at the edges, I place the most obvious pieces first, curved pieces against the curved edge or square pieces along straight area or in corners.  Always keep in mind how to fit them naturally together and how much cutting will be required to fit them together.

Cutting Stone:

So now you have placed all the easy pieces of stone, the ones that fit for the most part

flagstone patio Durango landscaping patio design outdoor hottub area flagstone patio

Place pieces that naturally go together, starting with the edges.

and might require minimal cutting and you have used most of the pieces you unloaded from your pallet.  Time to get the pencil and start marking where you will cut the pieces  so that they fit well together.  I make my gaps between individual stones about the width of my thumb or a little larger, try to be as consistent as possible.  Mark with your pencil where you will cut , put your safety gear on and start cutting along the line you marked.  Do not be in a hurry, let the blade work its way into the stone, if it sparks you might be trying to go too fast or pushing too hard.  Do not worry if your blade does not cut completely through the stone, you will be able to break it.  Now, you have cut several pieces and broken the waste off with your chisel and hammer you can slide the stone next to its neighbor and start to see what your patio is going to look like.

colorado flagstone walkway and patio

After cutting, all pieces should fit with similar sized joints

Repeat this process, unload more stone , find ones that seem to go with what you have already cut, place and mark them and then cut them to fit.  Soon, you will come to the conclusion that they all do not fit without being cut on at least three sides and the fast progress is over.  Try to minimize the cutting and waste, remember that you paid for stone by the pound and you do not want to go back for more.

Of course,we at Gardenhart Landscape & Design offer this information in the hopes that you decide that this process requires experience and skill and you will hire us to do your landscaping instead of doing it yourself.  As with many things, there is always details that are hard to share but easy to see in the finished product.  We have a you tube video that shows this process too!

Cheers,

David Hart

Gardenhart Landscape & Design

970-749-1555

http://www.gardenhartlandscapedesign.com

Facebook for more sustainable landscaping tips.

Please review us on Google Places

Advertisements

Leave a comment »

Best Perennials to Plant in Durango, CO That are Resistant to Deer & Rabbits

What to do about deer eating bulbs

delicate and tasty bulbs

Best Perennials to Plant in Durango, CO That are Resistant to Deer & Rabbits

How do you deal with the critters that are hungry?  Early spring when there is little to eat, the deer and rabbit are pervasive.  It is very difficult to keep them out of gardens and from eating my early blooming bulbs.  They both eat my daylillies and tulips  on the  south  side of my home every year. Daffodils, rhubarb and grape hyacinths generally go unscathed.  Amazingly also they will nibble on the fresh new growths of rose bushes, of which there is only one in our yard.

Several of our local Durango gardeners like to use a product called Bobex, which is sprayed on your plants.  It makes the plants unappetizing to these critters and they are less likely to eat them up. I do not have personal experience with this product, but some swear by it.  I also think that there are several other brands that work the same way, I would ask at your favorite garden center for their personal preference. Organic Gardening Magazine has several ideas on how to control garden pests.

Locally,  Durango Nursery and Supply’s recommended zone 3 perennials that are more resistant to deer is a very helpful list.  The only really proven way to control the deer and rabbits is to put up a very big and sturdy fence.

Cheers,

David Hart

Gardenhart Landscape & Design

970-749-1555

http://www.gardenhartlandscapedesign.com

Facebook for more sustainable landscaping tips.

Leave a comment »

Landscaping Can Prevent Damage From Avalanches in Southwest Colorado

Landscaping Tips to Prevent Damage From Avalanches in Durango, Colorado

This past January a snow slide hit a house.  This Durango house was adjacent to a cliff, with little landscaping above it.  If you are located in potential slide area, Gardenhart Landscape and Design recommends planting evergreen trees above and throughout the avalanche run out zone. Another thing that you could do would be to protect the home with rock outcrops above the home.  Overall the best landscaping tactic is tree planting, as the trees will slow down the overall run-out.

Obviously when looking at new homes, it is best to be wary of purchasing anything that abuts any cliff or dirt, especially brand new construction.  The amount of drainage from such area may be unknown, and destructive, plus weather patterns may change.  The major accumulation of snow would be the north side slope, but a west and south-facing slope may melt faster.

 

durango colorado avalanche damage how to prevent with landscapinglandscaping tips to prevent avalanche, mud and water damage

Cheers,

David Hart

Gardenhart Landscape & Design

970-749-1555

http://www.gardenhartlandscapedesign.com

Facebook for more sustainable landscaping tips.

Comments (1) »

Durango Colorado Tree Pruning Tips

Durango has been designated a Tree City USA by the National Arbor Day foundation for 36 consecutive years.  In 1978 Durango City Council  adopted a resolution to assume ownership & maintenance responsibilities for trees on City property and in the Right Of Way.  Park Department personnel determined in 1980 that a formal tree management program was needed and they have taken the appropriate actions since.   The four requirements to obtain this designation from the Arbor Day Foundation:

  1. Ordinance for Tree Protection  and Licensing program
  2. Hold annual Arbor Day ceremony
  3. Establish Parks & Forestry Board
  4. Hire full-time Forestry Staff.

In the March issue of Lawn and Landscape Magazine they have focused on tree care.  This article on preventing tree topping gives several great reasons why this is not a sustainable practice.

Some photos of tree topping:

I notice this tree topping practice and cringe.  You might as well simply cut down the tree instead, because by utilizing this practice you are decreasing the health and vigor of the tree and thus make it  susceptible to diseases and insect infestation, thus it will  most likely die.  Fortunately, Durango has some control over the pruning practices that occur within city limits.  In order to prune trees in town for hire, the individual must obtain a licence from the city.  This process requires a written and a practical test overseen by the City Arborist.

If you are considering hiring a person to prune your trees and shrubs, be sure to ask for and see their licence from the city of Durango. You can call the city at 970-375-5010  to see if they hold a current licence or view their list.  This is a good way to determine the licensee’s understanding of horticulture and their skill with a saw and pruner. Also, you can report questionable persons or their work to the City Arborist, whose number is 970-375-7383.

Cheers,

David Hart

Gardenhart Landscape & Design

970-749-1555

http://www.gardenhartlandscapedesign.com

Facebook for more sustainable landscaping tips.

Leave a comment »

%d bloggers like this: